New air box

[dad2bike]

Originally Posted by Johnf3

Jetting is available. You get the jets and put them in. I haven't figured out yet how a bunch of off the shelf ordinary jets magically becomes a "kit".

I think I got pretty darn close. I don't have a wide band sensor, but I can sure pull a spark plug and look at it.

It's a wonder how we ever tuned our bikes back in the days before electronics huh.

[crankshaft]

The CPR filters worked well for the MX 1000. Mike finished 2nd overall without a filter change! Out chase truck driver rode the bike out of MX from Cabo for a total of 2200 miles and the filter was still working well! Big thanks to CPR. Mike and I both got dusted out by Terrible Herbst and Robbie Gordon
Our jetting is perfect, we got 92- 100 miles per tank at race pace and some of was dry lake bed and deep sand. I've never been in 6th gear that long on dirt. Sustained speeds of 80-100+ for hours. Head2wind and CJ helped us out big time!

[bikyto]

Originally Posted by crankshaft

The CPR filters worked well for the MX 1000. Mike finished 2nd overall without a filter change! Out chase truck driver rode the bike out of MX from Cabo for a total of 2200 miles and the filter was still working well! Big thanks to CPR. Mike and I both got dusted out by Terrible Herbst and Robbie Gordon
Our jetting is perfect, we got 92- 100 miles per tank at race pace and some of was dry lake bed and deep sand. I've never been in 6th gear that long on dirt. Sustained speeds of 80-100+ for hours. Head2wind and CJ helped us out big time!

Thanks great news!!!
Really. Can't wait to see pictures. And congrats on the race.

[Johnf3]

Got out for 100 mile ride this morning and although the bike ran great, my fuel mileage was terrible, so I will try smaller mains, and see what that does.

Edit: Actually my fuel mileage was really good, for some reason no fuel was drawn from the right hand tank (yes I had the fuel tap (s) all open). I must of pinched a line. I'll pull the tank and check it all out. I have had the tanks on and off a dozen times and never have done this before.

I actually found some mud, in a not so dry wash. The outside of the bike was pretty muddy, but there was none at all on on the filter. It looks like the tanks really shield the filter well, and that is one thing I was curious about. I rode by myself today, so conditions were pretty much dust free, so no test on that part yet.

[BillyD]

Originally Posted by crankshaft

Mike and I both got dusted out by Terrible Herbst and Robbie Gordon

I worked with Team MacPherson Chevrolet running a Trophy Truck and Class 4 for 3 years back in the 90's.

Watching a Trophy Truck scamper over the whoops at 100+ MPH while passing motorcycles cured me of any desire to be on a bike on any course at the same time as those guys.

Congrats on the excellent results.

[crankshaft]

Originally Posted by BillyD

I worked with Team MacPherson Chevrolet running a Trophy Truck and Class 4 for 3 years back in the 90's.

Watching a Trophy Truck scamper over the whoops at 100+ MPH while passing motorcycles cured me of any desire to be on a bike on any course at the same time as those guys.

Congrats on the excellent results.

Herbst passed me just outside El Arco in the rocky stretch and Robby caught
me on a sand road on the way to San Ignatio. I was going 90-100 and he went by like I was sitting still. He went wide, so it was a nice pass. The experience was easier than I thought honestly

The Sand whoops in San Filepe sucked

[Sporting Wood]

Stobie used to keep that bike So Clean!

[gefr]

A representative in Europe?
Cheers.

[moto-treks]

I just got mine from CJ

Does the stock map work or would one be better off starting with the Akro map?

[Spark01]

Originally Posted by gefr

A representative in Europe?
Cheers.

No that i'm awear of, i just ordered it directly at CPR.

Tommorow my bike is put on the dyno, can't wait for the results

[CPRFAB]

Originally Posted by gefr

A representative in Europe?
Cheers.

Gabriel at "ZEN Overland" had signed up in the UK as a dealer. He has 10 arriving any day shipped from here. 5 / 990's and 5 / 950's. Give them a ring. They are probably not up on the site yet.
T (This was not the correct phone number. We have taken it out so the guy who is answering the phone doesn't blow a gasket! )
F 01749 372200
E info@zenoverland.com
Wwww.zenoverland.com

[Head2Wind]

Originally Posted by moto-treks

I just got mine from CJ

Does the stock map work or would one be better off starting with the Akro map?

suggest the "akro" map as a starting point, stock map will be too lean on the top

[Spark01]

Here are some pictures from my installation, to bad that due to problems with the throttle body that we run out of time yesterday. So i can't present any results yet .

Before:
.

2nd valves removed and X-ring in to place


Base plate installed with RC8 stacks


Filter installed


With fuel tank inplace






And a picture what was wrong with the throttle body, the valves wheren't correct installed in the middle of the throttle body.
And caused small markes inside, see the black stripe.

So we had to remove the screws and reposition the valves, and after apply loctite to the screws and flatting the screws on the other side so that they never will come loose again

[Zen Overland]

Originally Posted by gefr

A representative in Europe?
Cheers.

As CPRFAB said, we've got 10 arriving on Monday; they are already on our site at this link:

http://www.zenoverland.com/ktm_950-a...ntake_ktm.html

Do give me a shout if you need anything. We regularly ship to Greece, and with lightweight items like this it's pretty inexpensive.

[crankshaft]

Originally Posted by Sporting Wood

Stobie used to keep that bike So Clean!

It's clean again (for the most part)