Aw hells bells, my chain looked like crap when I had the bike up on the lift yesterday, so I'll take one. PM about to be sent...
I'm back in town and ready to ship them out. Did everyone get one that wanted one? $56 for two to your door(cont US). $79 for three to your door(cont US).
Paul.....Ive been looking for one of these in the US. Im actually an hour south of you.....my mom lives in Ankeny and Im going to be up that way this week or next. Hows about I just swing by or meet you someplace?
If you still have some, what are the chances of getting one from Iowa to Minnesota before I leave for a trip next week? PM on its way.
I mounted one on my GFs 2011 BMW G650GS. I took about an hour doing it.....but 45 mins was eyeballing the machine and working out my plan. I dont have a picture....but I can snap one and upload it if you wanna see it. Seems to work well......only downside Ive seen so far is caused by user error. I overfilled the reservoir......so now the vbration of the machine causes oil to seep out the plunger at the top.....all down the engine case - oh well......this machine has never been clean. Seems to oil well.....simple design. Im using "left over" clean oil. When I do an oil change in my cars, motorcycles, ATVs I always have a little dribble in the bottom of the quart or gallon jub. I drain all these "leavings" in a gallon jug.........and I use it as general lube for drill bits.....cutting......bolts......etc - Im also using that to fill the Loobman.
Im using "left over" clean oil. When I do an oil change in my cars, motorcycles, ATVs I always have a little dribble in the bottom of the quart or gallon jub. I drain all these "leavings" in a gallon jug.........and I use it as general lube for drill bits.....cutting......bolts......etc - Im also using that to fill the Loobman Are you sure you don't have a KLR, brother? You sound like some of my team....
