XR 650R: Ultimate Jetting Instruction for Dummies

[babuja]

When at relanti if I give a strong aceleration the motor hesitates and some time dies...

If I gradualy acelerate a bit and then give a strong acceleration I have no problem.

What cold be the problem? Tnks guys

[sintax]

Originally Posted by babuja

When at relanti if I give a strong aceleration the motor hesitates and some time dies...

If I gradualy acelerate a bit and been give a stronh aceleration I have no problem.

What cold be the problem? Tnks guys

sounds like you might be a little too rich.

You might try dropping the needle down one spot, see what effect that has on it. Since the need needle plays a big role in the whole mid range power, it may affect it poorly. If that happens move the needle back. And try dropping down one size main.

You and I have close to the same elevation and temp, but you have much higher humidity. When I get home tonight I can see if i can find my settings for when I jetted my stock carb. I have since moved to the TM40. I completed jetting it yesterday, it is amazing!

[babuja]

Originally Posted by sintax

sounds like you might be a little too rich.

You might try dropping the needle down one spot, see what effect that has on it. Since the need needle plays a big role in the whole mid range power, it may affect it poorly. If that happens move the needle back. And try dropping down one size main.

You and I have close to the same elevation and temp, but you have much higher humidity. When I get home tonight I can see if i can find my settings for when I jetted my stock carb. I have since moved to the TM40. I completed jetting it yesterday, it is amazing!

Thanks sintax, I appreciate that...tnks man

[babuja]

[sintax]

very sexy man. Love the USD forks!

[babuja]