R75/5 Charging Mystery - Page 2

OldNFast · 10-30-2012, 06:33 PM

Bike is back in running form. I'm pretty sure the problem was the stator. I tested all three contacts and two of them were low. The 14.5 I was getting was DC into the diode board. You must check AC coming off the stator.

But, I am assuming, as I found the compatible /6 rotor/stator/diode board on eBay and installed it today. How nice it is to have the generator light go out at 1000 RM.

Thanks to all who contributed.

10-30-2012, 06:33 PM	#16
OldNFast ^OP n00b Joined: Sep 2012 Location: Allentown, PA Oddometer: 8	Up and Running Bike is back in running form. I'm pretty sure the problem was the stator. I tested all three contacts and two of them were low. The 14.5 I was getting was DC into the diode board. You must check AC coming off the stator. But, I am assuming, as I found the compatible /6 rotor/stator/diode board on eBay and installed it today. How nice it is to have the generator light go out at 1000 RM. Thanks to all who contributed.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode