Installing J&M Blu277 in a Neotec

White Knuckles · 11-21-2012, 01:23 PM

Does anyone have a photo of a Blu277 installed on a Shoei Neotec? I'm trying to find out how to resolve the interference between the J&M clamp and the energy absorbing material next to the clamp. Also, do I need to modify the cheek pad to accommodate the clamp? Thanks.

10/10ths · 11-21-2012, 02:31 PM

http://www.rka-luggage.com/A24%20J%2...IN%20PAGE.html

White Knuckles · 11-22-2012, 09:02 PM

Just a photo of J&M's install would do it. I had no luck with J&M when I had a similar problem with this unit and a Multitec, so I am reluctant to call again.

11-21-2012, 01:23 PM	#1
White Knuckles ^OP Insufficient memory Joined: Aug 2003 Location: Weimar, Calif. Oddometer: 4,221	Installing J&M Blu277 in a Neotec Does anyone have a photo of a Blu277 installed on a Shoei Neotec? I'm trying to find out how to resolve the interference between the J&M clamp and the energy absorbing material next to the clamp. Also, do I need to modify the cheek pad to accommodate the clamp? Thanks. __________________ Critical Thinking: America's other great deficit.

11-21-2012, 02:31 PM	#2
10/10ths Road Trip Fool Joined: Aug 2007 Location: Bayou country Oddometer: 757	Ask J&M or Richard at RKA..... http://www.rka-luggage.com/A24%20J%2...IN%20PAGE.html __________________ 1997 Ducati Monster 750 2004 Suzuki V-Strom 650 2004 Honda RC51

11-22-2012, 09:02 PM	#3
White Knuckles ^OP Insufficient memory Joined: Aug 2003 Location: Weimar, Calif. Oddometer: 4,221	Just a photo of J&M's install would do it. I had no luck with J&M when I had a similar problem with this unit and a Multitec, so I am reluctant to call again. __________________ Critical Thinking: America's other great deficit.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode