ADVrider

Go Back   ADVrider > Bikes > Thumpers
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 11-20-2012, 10:34 AM   #1
road_warrior64 OP
n00b
 
Joined: Oct 2008
Oddometer: 4
DR200SE Exhaust and Windshield

Two mods for the DR200SE. First, the exhaust. DG Performance makes two exhaust slip-ons for the bike ($160 on Ebay). The "O" series is oval similar to the stock muffler. The "R" series is round (and weighs a little bit less). I went for the oval because I liked the look and they make silencer inserts for them. First, the before:

http://s1326.beta.photobucket.com/us...88933063967148

A comparison of the two. Stock exhuast is roughly 8 pounds. DG is roughly 4 pounds.

http://s1326.beta.photobucket.com/us...07810876092568

And without any further ado, the after:

http://s1326.beta.photobucket.com/us...07810876092568

Warning!!! The DG is loud! It's a straight-through muffler and the 1.25" silencer I bought does nothing to reduce the noise. I ended up making a supplemental silencer (metal screen and steel wool) which helps (a little). Yes, I did reject with the Kientech jet kit. It warms up within seconds, adds much more power, and runs great. I did have to lower the needle two clip positions to eliminate a nasty off-idle stumble.

Next, the windshield. I only paid $1,200 for the bike so I really did not want to spend a tenth of that price for a windshield. I borrowed this idea from a guy on Youtube so I can't take the credit. It cost a total of $10, took 5 minutes to install, can be removed in two seconds, and returned to stock in 10 seconds.

http://s1326.beta.photobucket.com/us...88933063967148

http://s1326.beta.photobucket.com/us...87658351297142

http://s1326.beta.photobucket.com/us...87658351297142

It's a 3M Tekk Replacement Faceshield ($7.52 on Amazon). I spent three bucks for three Scotch removal adhesive strips. They are 3X stronger than velcro (according to the package). Two strips where the faceshield meets the headlight cowling. It sits on the turn signals and behind the speedometer perfectly. I did use the Dremel to make a small indention for the brake hose.

For ten bucks, I am very pleased. The majority of the wind is diverted from my chest. Also, you can duck behind it for rain, bugs, and shaving tenths off of your quarter mile time (just kidding). It is very secure and does not buffet in the wind. Good luck!

John
road_warrior64
road_warrior64 is offline   Reply With Quote
Old 11-20-2012, 02:21 PM   #2
MrPulldown
Beastly Adventurer
 
MrPulldown's Avatar
 
Joined: Aug 2009
Location: Truckee
Oddometer: 2,923
That stock can is a monster. Too bad the DG is so loud.

The headlight cow,l is the exact shape as the DR350 one. I have some clear plastic (acrilic like stuff), I bought from the hardware store I am going to try to make into a windshield. Yours is still velcroed right. Jsut a different brand.
MrPulldown is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 04:32 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014