ADVrider

Go Back   ADVrider > Bikes > Old's Cool > Airheads
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 11-24-2012, 12:58 PM   #1
Noswal OP
Adventurer
 
Noswal's Avatar
 
Joined: Jun 2009
Oddometer: 78
Airhead Centerstand Question

So- I just picked up a 1975 R90S and the centerstand can only be deployed by hand- the little arm thing that you step on to drop the stand is broken off right at the left centerstand arm. I guess my options are:
(a) buy/find a new/used centerstand.
(b) weld a new arm onto the existing stand.
(c) find out if there is some sort of aftermarket bolt on type thing that would restore it's function.
The arm thing that is missing (at least on my old /6) was flimsy at best and sort of grew to become this ugly, twisted piece of metal- there has to be something better...

What do you guys do when that piece twists or breaks?
Noswal is offline   Reply With Quote
Old 11-24-2012, 01:40 PM   #2
JonnyCash
turd polisher
 
Joined: Jan 2011
Location: Midcoast, Maine
Oddometer: 1,276
The foot tang on the stock setup works fine, as long as you only use it to push the stand down until it hits the ground. Then you put your foot on the foot of the stand and rock the bike up onto the stand. I realize that that might not be as clear as I mean for it to be, but I'll hope you get the point. I'd just weld on, or have someone else weld on a tang and go with it.
__________________
I wouldn't bring her home to Mama, but Mama ain't home tonight.
JonnyCash is offline   Reply With Quote
Old 11-24-2012, 03:24 PM   #3
Sic Semper Tyrannis
.
 
Joined: Aug 2009
Oddometer: 419
that tang ONLY lowers it to the ground. It isn't like a japanese bike where it also lever the stand into place.

Place the ball of your right foot on the left foot of the centerstand, shift your weight to the right foot, tug back with your left hand on the bars and lift straight up with your right hand....viola!

Welcome to the BMW cult...
Sic Semper Tyrannis is offline   Reply With Quote
Old 11-25-2012, 07:57 PM   #4
ozmoses
Ride On
 
ozmoses's Avatar
 
Joined: Jul 2009
Location: USA
Oddometer: 1,986
Some guys weld a piece(threaded rod,etc) on when that tab eventually breaks; even when used correctly, it breaks.

I don't know of an official aftermarket fix.
__________________
Opinions are like internet connections- everybody has one.
ozmoses is offline   Reply With Quote
Old 11-26-2012, 12:20 AM   #5
ME 109
Beastly Adventurer
 
ME 109's Avatar
 
Joined: Jun 2009
Location: Albury Australia
Oddometer: 1,582
I welded a piece of 12mm solid round onto my c/stand with a tiny 6mm diametre tit on the end of it.
The little piece of 6mm protrudes just enough for my boot to catch it and deploy.
Been there for years now.
Who cares about the extra weight, it's sprung. Twice.
__________________
Lord of the Bings
ME 109 is online now   Reply With Quote
Old 11-26-2012, 01:11 PM   #6
CaptDanimal
Adventurer
 
CaptDanimal's Avatar
 
Joined: Nov 2012
Location: Daytona
Oddometer: 37
got one ... ya want it?

I will gladly sell you my center stand from my 87 R80rt.. I have no clue if it would work or not but they may be interchangeable? You'll have to ask around I bet. cheap cheap.. Its just sitting there
CaptDanimal is offline   Reply With Quote
Old 11-26-2012, 03:23 PM   #7
Ray R
Studly Adventurer
 
Ray R's Avatar
 
Joined: Dec 2006
Location: Aurora, OR
Oddometer: 633
I believe you can get new ones from the dealer for @ $215. Or $160 plus $35 shipping from ebay user alteteile2003. But the latter takes a long time to ship from Germany.
__________________
Too many bikes. Not enough time.

Ray R screwed with this post 11-26-2012 at 03:32 PM
Ray R is offline   Reply With Quote
Old 11-26-2012, 08:52 PM   #8
bmweuro
Mad Scientist
 
bmweuro's Avatar
 
Joined: Nov 2003
Location: Chico, California
Oddometer: 3,282
B- It's an easy fix.
__________________
BOXER Metal
BMW Biker Scum
BMW Mad Scientist!
VBMWMO #7770, BMW MOA #48694 & Airhead BMW Club #600
bmweuro is offline   Reply With Quote
Old 11-26-2012, 09:23 PM   #9
Big Bamboo
Aircooled & Sunbaked
 
Big Bamboo's Avatar
 
Joined: Sep 2010
Location: Big Island of Hawaii
Oddometer: 2,215
You might want to check the legs of the center stand for wear as well. If they need patching too, you need to compare the cost of getting it all welded up to buying new. If you have to remove it, might be time to consider new bushings and bolts.
__________________
I was riding my dirt bike up in the hills last week, when a damn goat came and knocked me off my bike. There behooves all up in my face an' shit...
Big Bamboo is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 03:38 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014