|05-17-2013, 06:02 PM||#1|
Joined: Feb 2013
Need Help wiring Ural From Scratch
I need help sorting out a wiring diagram for my ural which is a basket case, I'd like to base it off the 2010+ diagram but having problems figuring out how to edit it to suit my needs. I have a '05 750 engine with type v ignition, denso alt and putting it in what was originally a 94 bike. The headlamp bucket (which is also devoid of wires) uses what i think is an old m63 switch and at one point was wired for push key in for on and the three selections were ON/Low Beam On/High beam On/park.
I would like a right handle bar devoid of electrical controls so that means deleting the kill button and relocating the start button, also on the Left bar will be only horn and turn signals.
Anybody know a thing or two about wiring be nice enough to help?
|05-17-2013, 08:31 PM||#3|
Howling "Mad", Adventurer
Joined: Aug 2001
Location: Granite Falls, Washington State, USA
Welcome to ADV and the Hacks forum.
I don't know squat about wiring but I strongly advise you to replace the type five ignition with the new Ducati setup the Ural has been using since 2007, its a bolt in swap and it won't burn pistons like a type five when it goes in a random wild super advance mode.
Dave, aka "Mr. Cob" Want a STEEL SKID PLATE for your Ural, contact me for details.
My photos, http://mr-cob.smugmug.com/ Help a CHEAP bastard keep his Smugmug, use this coupon ( geyYbNZwLLrl6 ) thank you.
|05-18-2013, 10:04 AM||#4|
Joined: Feb 2003
Where are you located at?
06 Ural Patrol
03 R1150 GS Sport/ Friendship II
99 Rokon Ranger
71 Rokon RT140
Hack'n the TLH
Proud Member of the Patrol Patrol
|Thread Tools||Search this Thread|