Honda thumper fork swap thread XRL XRR XLR NX

Carter Pewterschmidt · 12-26-2012, 06:04 PM

This forum needs a thread with some good Honda fork size's and common swaps among thumpers. I would be nice to have a diameter and length breakdown and parts needed for stock Honda fork swaps. Some popular forks like the XR600R fork, XR650R, XR400R, XR250R, XL600R, XR650L, NX650, etc. Even USD fork swaps. So many on here have done swaps like this we should just combine them all into one thread that covers most bases. Your contributions will be appreciated!

kubiak · 12-26-2012, 06:16 PM

i will start with usd forks that bolt right up to xr 600 and 650l are forks off 89cr500 and 90 cr125,250,500.

elsalvadorklr · 12-27-2012, 08:32 AM

my xr6 took cr250r forks, on that same line it will accept any cr/crf forks with minimal modding...easy or hard depending on what you buy

I will add that length and diameter doesnt matter much, what does is what stem and or bushings and or aftermarket stem and clamp setup will plug into your frame.

cheers

12-26-2012, 06:04 PM	#1
Carter Pewterschmidt ^OP Studly Adventurer Joined: Nov 2010 Location: Milwaukee Oddometer: 639	Honda thumper fork swap thread XRL XRR XLR NX This forum needs a thread with some good Honda fork size's and common swaps among thumpers. I would be nice to have a diameter and length breakdown and parts needed for stock Honda fork swaps. Some popular forks like the XR600R fork, XR650R, XR400R, XR250R, XL600R, XR650L, NX650, etc. Even USD fork swaps. So many on here have done swaps like this we should just combine them all into one thread that covers most bases. Your contributions will be appreciated!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-26-2012, 06:16 PM	#2
kubiak Beastly Adventurer Joined: Nov 2007 Location: madera california Oddometer: 4,144	i will start with usd forks that bolt right up to xr 600 and 650l are forks off 89cr500 and 90 cr125,250,500.

12-27-2012, 08:32 AM	#3
elsalvadorklr Beastly Adventurer Joined: Nov 2008 Location: el salvador Oddometer: 3,967	my xr6 took cr250r forks, on that same line it will accept any cr/crf forks with minimal modding...easy or hard depending on what you buy I will add that length and diameter doesnt matter much, what does is what stem and or bushings and or aftermarket stem and clamp setup will plug into your frame. cheers