JUst got a KTM and need help

PerazziMx14 · 12-27-2012, 05:41 AM

Hello,

I just picked up a 1995 KTM LC4 620 street/trail bike. The front turn signals work but the headlight, brakelight and rear turn signals do not work. Ant ideas where and/or what to look for?

Also I am guessing that I have an RXC model?? KTM information is sketchy at best from what I have been able to find on the internet. What is the difference betweeb the EXC and the RXC?

Thank you,

Lance

Harley Beemer · 12-27-2012, 05:50 AM

Lance,

Big dif between these bikes.

Go over to ktmtalk and read the specific forum. Sign up and post your question there too.

Good luck.

gatorgrizz27 · 12-27-2012, 12:24 PM

Start with the fuse, then check power to your switches.

DangerDane · 12-27-2012, 05:47 PM

Check out the wires that run back to the tail light bikes vibrate, a lot and at the body and sub frame the wires ware down that's what happen to mine. Get some zip ties so wires aren't lose and I drilled and made some cuts on the plastic so it wouldn't rub.

mmrevolver · 12-29-2012, 05:13 PM

Whatever model you have, if it's got an LC-4 motor all models have more in common than not. I've got a 1995 Duke 1, same motor as yours and there's no better site than this one for practical information to keep an LC-4 happy. They do shake the connectors, start there and see if the problem isn' t obvious. Read the information on the KTM LC-4 on this site. It's the BEST anywhere.

Parts are actually pretty easy to get, best to have the KTM part numbers, always order OEM stuff online cause no dealers IME, have any parts stocked anyway. I have a few of the 95 model year manuals, PM if interested.

Mike

12-27-2012, 05:41 AM	#1
PerazziMx14 ^OP n00b Joined: Oct 2011 Oddometer: 3	JUst got a KTM and need help Hello, I just picked up a 1995 KTM LC4 620 street/trail bike. The front turn signals work but the headlight, brakelight and rear turn signals do not work. Ant ideas where and/or what to look for? Also I am guessing that I have an RXC model?? KTM information is sketchy at best from what I have been able to find on the internet. What is the difference betweeb the EXC and the RXC? Thank you, Lance

12-27-2012, 05:50 AM	#2
Harley Beemer Adventurer Joined: Jun 2008 Location: Sonoma County Oddometer: 76	Lance, Big dif between these bikes. Go over to ktmtalk and read the specific forum. Sign up and post your question there too. Good luck. __________________ 13' KTM 500 exc 06' Suzuki DR 650 09' Genuine Blackjack 08' KTM 300 xcw

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-27-2012, 12:24 PM	#3
gatorgrizz27 Adventurer Joined: Jun 2008 Location: Austin, TX Oddometer: 92	Start with the fuse, then check power to your switches.

12-27-2012, 05:47 PM	#4
DangerDane Adventurer Joined: Dec 2012 Location: Minnesota Oddometer: 23	Check out the wires that run back to the tail light bikes vibrate, a lot and at the body and sub frame the wires ware down that's what happen to mine. Get some zip ties so wires aren't lose and I drilled and made some cuts on the plastic so it wouldn't rub.

12-29-2012, 05:13 PM	#5
mmrevolver Adventurer Joined: Jun 2006 Oddometer: 13	Whatever model you have, if it's got an LC-4 motor all models have more in common than not. I've got a 1995 Duke 1, same motor as yours and there's no better site than this one for practical information to keep an LC-4 happy. They do shake the connectors, start there and see if the problem isn' t obvious. Read the information on the KTM LC-4 on this site. It's the BEST anywhere. Parts are actually pretty easy to get, best to have the KTM part numbers, always order OEM stuff online cause no dealers IME, have any parts stocked anyway. I have a few of the 95 model year manuals, PM if interested. Mike