ADVrider

Go Back   ADVrider > Bikes > Thumpers
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 01-02-2013, 08:08 PM   #1
davisdrafting OP
n00b
 
Joined: May 2009
Location: NorCAL
Oddometer: 9
DR200SE OEM blinker (wings) mod

The hardest part is removing the pins from the connector, they are retained by plastic from the connector not metal on the pin which is typical.

Cut stem about 1/2" from last ridge

From Drop Box


Chop off about 1/2" from flat mounting surface and remove rubber

From Drop Box



Drill the end that fits in the blinker out to 1/2" dia. (a 1/2" step drill works best) insert threaded mount into hole 1/8: apply super glue and press together in vise.

From Drop Box



Reassemble.

From Drop Box
davisdrafting is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 06:15 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014