Side stand for 2003 GSA

[greendy]

Does any one know if a side stand for a 2001 GS is compatible with a 2003 GSA. I buggered my side stand up in a minor gravity induced issue in Alaska last summer!! You don't know how badly you need a side stand until you don't have one.... especially fully loaded!!!!

[bemiiten]

Not sure about the 1150, but you can't do it on a 1200. The longer GSA side stand hits the centerstand.

[Karlxx]

I think the side stands are the same, my 1150GSA sure does lean a long way (to far IMHO), I figured it was because the stand was not lengthened when the suspension travel was.
K

[Lomax]

The part number for the side stand on a 2003 GSA is 46537665503. The part number for a side stand on a 2001 GS is 46532335787 according to Real OEM. So the part numbers are not the same. It may work but may not.

Marc

[jsb223]

Might have to do the hockey puck mod but would most likely work.

[Chev.]

The GSA side stand is longer.

[greendy]

It looks like i bent the mounting bracket and not the actual side stand, I'm hoping the bracket will work, perhaps alittle persuasion may be needed!!!

[chromemonkey]

i just swapped a GSA 03 model side stand to my gs 02 model and it works really well , the GSA stand is a couple of inches longer ,it does just touch the center stand only by a couple of mm , and it stands the bike up at a good angle

[greendy]

Originally Posted by chromemonkey

i just swapped a GSA 03 model side stand to my gs 02 model and it works really well , the GSA stand is a couple of inches longer ,it does just touch the center stand only by a couple of mm , and it stands the bike up at a good angle

im doing the exact opposite, i may have to fab something up to make sure the bracket fits .... im hoping that it just bolts up