|01-25-2013, 06:00 PM||#1|
Joined: May 2009
Location: Locust Dale, VA
95 KTM 300 EXC Wiring
I'm putting lights on my recently acquired 95 300 EXC. Trying to get information on the wiring that went to the originl set-up. From what I would guess to be the rectifier under the tank, I have 3 plugs. The yellow wire comes off the rectifier into the harness. There's a single plug with a yellow wire, a single plug with a yellow wire and a white wire, and a double pronged plug with a brown wire and a yellow wire. Also there is a split off the harness that goes down by the kick-starter that has 2 plugs. I have no head-lightswitch at the moment. Does anyone know what should go where and to what? The oldest schem. from KTM is for 2005 EXC's. That also happens to be the year of my lights. Curious if these bikes has brake switches as well? I do know the brown wires are for grounding.
"Over the Mountains Of the Moon,
Down the Valley of the Shadow, Ride, boldly ride,"
The shade replied- "If you seek for Eldorado!" E.A.P. 1849
04 KTM 950ADV ~ "BEASTIE", '13 KTM 300XCW, '08 KTM 450XCR-W (selling), Husky 360WR/CR, Bultaco Frontera 250
vabuckaroo68 screwed with this post 01-25-2013 at 06:48 PM
|Thread Tools||Search this Thread|