fat bars on r100 gs

[jackass dave]

http://s1116.beta.photobucket.com/us...arsgs.jpg.html" target="_blank">http://i1116.photobucket.com/albums/.../fatbarsgs.jpg" border="0" alt=" photo fatbarsgs.jpg"/>

[jackass dave]

bugger that didnt work either javascript:void(0);

[jackass dave]

[jackass dave]

at last ,monkey see monkey do ,i knew if i pressed enough bittons sooner or later it would work ,the picture above is the set up i need ..

[Patrick C Buckl]

Ok look...I'm tryin to be easy on you about the pictures but come on....that handle you've got, your giving us too much ammo here.

Yea thats about the setup I have which I like a lot, good beefy adapters, wide enough bar for good control and easy highway too.

Right On Jackass (damn feels weird saying that).

[Airhead Wrangler]

Originally Posted by jackass dave

the picture above is the set up i need ..

Those appear to just be Rox risers with whatever flavor of 1 1/8" bars. I suggest you investigate the "edit" function rather than creating a new post for every failed pic experiment.

[jackass dave]

easy tiger ,one step at a time ,pictures first ,then the edit button,who knows ,i could even put pictures and words together .

[Phreaky Phil]

My set up. 3 1/2" Rox risers and Protaper Copntour ATV bend bars.

[shearboy2004]

Two inch Rox with HDB's guards and KLX High Rise bars

[advNZer?]

all you guys with risers n higher bars,Are the cables long enough?

[Phreaky Phil]

Originally Posted by advNZer?

all you guys with risers n higher bars,Are the cables long enough?

Yep, no worries with the cables. In reality the bars aren't in that much of a different spot than stock. The Rox risers allow you to put different bar bends on. I wanted the 3 1/2 " risers so I could rotate things rearward so it was comfortable sitting, as I nearly always have a pillion.

[advNZer?]

Originally Posted by Phreaky Phil

Yep, no worries with the cables. In reality the bars aren't in that much of a different spot than stock. The Rox risers allow you to put different bar bends on. I wanted the 3 1/2 " risers so I could rotate things rearward so it was comfortable sitting, as I nearly always have a pillion.

i need the extra height i am 6 3 when i stand i feel like am still bent over

[Ras Thurlo]

I was really jazzed when I came across the Rox risers for the first time a few weeks ago on a brief expedition to Orange Krush and on paper they would seem to solve many problems (universal fit on triple clamps, height, inclination, fat bars).

Originally Posted by advNZer?

all you guys with risers n higher bars,Are the cables long enough?

I would assume most will go for longer risers and flatter bars than the stock GS, so on balance not so much overall height increase for the cables.

@ 6'4, I got 5" risers and high bend pro taper bars - to have a more rally stance, so am ready for a cable conversion... a small price to pay for comfortable standing ergonomics

[Rucksta]

Originally Posted by advNZer?

i need the extra height i am 6 3 when i stand i feel like am still bent over

I'm running a 75mm rise on std bars.
The clutch cable is just long enough.
Routing is important,

[Ras Thurlo]

Originally Posted by Rucksta

I'm running a 75mm rise on std bars.
The clutch cable is just long enough.
Routing is important,

I had 50mm rise and standard bar tilted right up for max height and the cables are fine but with little play left, so would agree that your setup is about max