Black Dog side stand Relocater

two trackin fool · 02-19-2013, 01:31 AM

Who has the Black Dog side stand on there 990 ?

Who has pics ??

I'm shopping and would like to see some pics before I pay

ralfi · 02-19-2013, 05:31 AM

there´s plenty of pics in the web and here as well...

akarob · 02-19-2013, 05:59 AM

I have one. Nice part.

It actually doesn't relocate the side stand, it changes how its attached to the bike. That's a good thing because you don't have to worry about doing any rewiring.

Denalidirt · 02-19-2013, 06:04 AM

on my 950. It doesn't get in the way and its just as easy to use. I disconnected the side stand switch at the same time.

Orangecicle · 02-19-2013, 06:19 AM

I have it on my 950. Great part. Also, I have an early 2005 950 with has an extra gusset on the frame down in that nether region. I opted to cut the BDCW bracket rather than cut the gusset or return the part. The part is still holding up just fine even with the fairly extensive cut. BDCW offered to send the early 2005 part for my bike for free because of the issue, but I declined and offered to just run this part as a test until it broke. That was years ago. Great part. Great service.

smj · 02-19-2013, 12:27 PM

I picked up a 2012 990r this past weekend. I asked the dealer about the need to relocate the kickstand, such as using the Black Dog product. He said that on the recent model 990's the kickstand has already been relocated... but was not sure if it fixed the porblem 100%... Fact or fiction? I am leaning hard towards just doing it so I don't have to worry about it - but I am wondering if this is a current model issue or not... Anyone able to fill in the gaps for me? Thanks!

DSM8 · 02-19-2013, 12:41 PM

Quote:

Originally Posted by smj

I picked up a 2012 990r this past weekend. I asked the dealer about the need to relocate the kickstand, such as using the Black Dog product. He said that on the recent model 990's the kickstand has already been relocated... but was not sure if it fixed the porblem 100%... Fact or fiction? I am leaning hard towards just doing it so I don't have to worry about it - but I am wondering if this is a current model issue or not... Anyone able to fill in the gaps for me? Thanks!

Look at how it attaches to the bike if there is a small bolt towards the front of the bike that goes into the bottom of the engine case then the issue is still there cause that is where is breaks..

two trackin fool · 02-19-2013, 12:48 PM

Oh thanks everyone .

I thought that there was also a bracket that actually relocated the stand to the foot peg mount ?

I was looking at the braces but for some reason I was thinking that there was a kit to actually move it ?

That was the pic I couldn't quite make out . I guess I know why .

DSM8 · 02-19-2013, 03:13 PM

Someone did make something that actually moved the side stand but I don't recall if it was a bolt in or a weld on solution.

If you have the side stand bracket, a good aftermarket skid plate and don't hammer the bike off road then that would pretty much take care of alleviating the problem.

The one from CJ Designs appears to take it completely off the motor.

http://www.cjdesignsllc.com/products...ation-bracket/

mdfehrmann · 02-19-2013, 07:42 PM

Quote:

Originally Posted by DSM8

Someone did make something that actually moved the side stand but I don't recall if it was a bolt in or a weld on solution.

If you have the side stand bracket, a good aftermarket skid plate and don't hammer the bike off road then that would pretty much take care of alleviating the problem.

The one from CJ Designs appears to take it completely off the motor.

http://www.cjdesignsllc.com/products...ation-bracket/

I'm on my second BD relocation bracket from breaking tire beads while on the trail. I hear this one has extra reinforcement to keep that from happening so it's only my short list to replace it in the next few months.. I can't have a broke side stand mount just cause I got a flat on the trail.

Matthew

sstewart · 02-19-2013, 08:05 PM

I have used them on both of my 950's, no regrets.

two trackin fool · 02-19-2013, 08:40 PM

Sweet yea that's the one I found (cjdesigns) and couldn't make out the pic !

THANK YOU

I'm just not sure which way to go now

. I was looking at the bike today and it seems that the brace would help to protect the oil lines too but then a good skid plate will to

. So meny farkels

.

I do plan on off slab ridding as I did with the KLR I'm just wondering if I spend a lil less on the side stand and a lil more on the skid plate all would be good ??????

Anyone attempt to claim the busted case on your insurence ??????????

chrish4ku · 02-19-2013, 09:32 PM

Had one on my 2008 (BDCW) have one on order now for my 2011.

The 2008 got punked in a street accident and the unit got bent - but the engine was fine! Proven!

Who knew the damn street would be the culprit. (don't worry wasn't my fault).

Rockwell · 02-20-2013, 04:39 AM

I have the BDSW side stand bracket. Recommended. Sorry, no pics.

DSM8 · 02-20-2013, 10:51 AM

Good Skid plate 1st.
Sidestand bracket 2nd

IF you have to put an order on things.

Honestly I have always been impressed with CJ's stuff.

I try to help him out with product testing and fitment when ever he needs it.
You cant go wrong with his setup.

Have you seen what he did to his 950? Check it out, then decide what you want to do.

02-19-2013, 01:31 AM	#1
two trackin fool ^OP Scott Joined: Nov 2010 Location: Wadhams , MI Oddometer: 778	Black Dog side stand Relocater Who has the Black Dog side stand on there 990 ? Who has pics ?? I'm shopping and would like to see some pics before I pay __________________ '10 990 WHITE

02-19-2013, 05:31 AM	#2
ralfi Adventurer Joined: Jul 2011 Location: Nuremberg, Franken, Germany Oddometer: 35	there´s plenty of pics in the web and here as well... __________________ KTM Adventure 990 LC8 - It´s never too late for being a happy child! \| : race it - break it - fix it / repeat : \|

02-19-2013, 05:59 AM	#3
akarob Green Cantern Joined: Apr 2009 Location: Skuncasville, CT Oddometer: 6,497	I have one. Nice part. It actually doesn't relocate the side stand, it changes how its attached to the bike. That's a good thing because you don't have to worry about doing any rewiring. __________________ 9 50/990 CRASH BAR BAGS, FENDER BAGS, and more. Made with pride. Pachaug Map '08 KTM 450 xcr-w, '10 KTM 990 Adventure '85 Honda CR500 NETRA #24519

02-19-2013, 06:04 AM	#4
Denalidirt High Plains Drifter Joined: Jul 2006 Location: Denali, Ak. Oddometer: 733	just fine on my 950. It doesn't get in the way and its just as easy to use. I disconnected the side stand switch at the same time.

02-19-2013, 06:19 AM	#5
Orangecicle Beastly Adventurer Joined: Apr 2007 Location: West Des Moines, IA Oddometer: 1,060	I have it on my 950. Great part. Also, I have an early 2005 950 with has an extra gusset on the frame down in that nether region. I opted to cut the BDCW bracket rather than cut the gusset or return the part. The part is still holding up just fine even with the fairly extensive cut. BDCW offered to send the early 2005 part for my bike for free because of the issue, but I declined and offered to just run this part as a test until it broke. That was years ago. Great part. Great service. __________________ "I'd like to meet the joker who had the nerve to call this a road!" -- Walter Sigmann

02-19-2013, 12:27 PM	#6
smj Adventurer Joined: Oct 2010 Location: Colorado Oddometer: 84	I picked up a 2012 990r this past weekend. I asked the dealer about the need to relocate the kickstand, such as using the Black Dog product. He said that on the recent model 990's the kickstand has already been relocated... but was not sure if it fixed the porblem 100%... Fact or fiction? I am leaning hard towards just doing it so I don't have to worry about it - but I am wondering if this is a current model issue or not... Anyone able to fill in the gaps for me? Thanks! __________________ Faint is the heart that runs from a fight, but it's a sorry set of legs 'let a man take a beating.

02-19-2013, 12:48 PM	#8
two trackin fool ^OP Scott Joined: Nov 2010 Location: Wadhams , MI Oddometer: 778	Oh thanks everyone . I thought that there was also a bracket that actually relocated the stand to the foot peg mount ? I was looking at the braces but for some reason I was thinking that there was a kit to actually move it ? That was the pic I couldn't quite make out . I guess I know why . __________________ '10 990 WHITE

02-19-2013, 03:13 PM	#9
DSM8 Where fun goes to die.... Joined: Aug 2005 Location: Glendora, Ca Oddometer: 3,144	Someone did make something that actually moved the side stand but I don't recall if it was a bolt in or a weld on solution. If you have the side stand bracket, a good aftermarket skid plate and don't hammer the bike off road then that would pretty much take care of alleviating the problem. The one from CJ Designs appears to take it completely off the motor. http://www.cjdesignsllc.com/products...ation-bracket/ __________________ DSM8 - A different kind of mean SQL > SELECT finger FROM hand WHERE id=3 WWW.DSM8.whereamiriding.com DSM8 screwed with this post 02-19-2013 at 03:21 PM

02-19-2013, 08:05 PM	#11
sstewart Studly Adventurer Joined: Nov 2009 Location: Boaz,Alabama Oddometer: 822	Bdcw I have used them on both of my 950's, no regrets.

02-19-2013, 08:40 PM	#12
two trackin fool ^OP Scott Joined: Nov 2010 Location: Wadhams , MI Oddometer: 778	Sweet yea that's the one I found (cjdesigns) and couldn't make out the pic ! THANK YOU I'm just not sure which way to go now . I was looking at the bike today and it seems that the brace would help to protect the oil lines too but then a good skid plate will to . So meny farkels . I do plan on off slab ridding as I did with the KLR I'm just wondering if I spend a lil less on the side stand and a lil more on the skid plate all would be good ?????? Anyone attempt to claim the busted case on your insurence ?????????? __________________ '10 990 WHITE two trackin fool screwed with this post 02-19-2013 at 09:35 PM

02-19-2013, 09:32 PM	#13
chrish4ku Studly Adventurer Joined: Jul 2009 Location: Alameda, CA Oddometer: 533	Had one on my 2008 (BDCW) have one on order now for my 2011. The 2008 got punked in a street accident and the unit got bent - but the engine was fine! Proven! Who knew the damn street would be the culprit. (don't worry wasn't my fault). __________________ _______________________ Chris I don't normally ride on the street,,,but when I do,,I prefer lane splitting. 2011 KTM 990 Adventure / 02' XR650R Chris' Sat Tracker

02-20-2013, 04:39 AM	#14
Rockwell Gnarly Adventurer Joined: Nov 2008 Location: Ontario Oddometer: 460	I have the BDSW side stand bracket. Recommended. Sorry, no pics. __________________ not all those who wander are lost \| two earthlings ride around the world Home \| Photo Blog \| The Route \| The Bike \| About Us \| Participate!

02-20-2013, 10:51 AM	#15
DSM8 Where fun goes to die.... Joined: Aug 2005 Location: Glendora, Ca Oddometer: 3,144	Good Skid plate 1st. Sidestand bracket 2nd IF you have to put an order on things. Honestly I have always been impressed with CJ's stuff. I try to help him out with product testing and fitment when ever he needs it. You cant go wrong with his setup. Have you seen what he did to his 950? Check it out, then decide what you want to do. __________________ DSM8 - A different kind of mean SQL > SELECT finger FROM hand WHERE id=3 WWW.DSM8.whereamiriding.com DSM8 screwed with this post 02-20-2013 at 01:42 PM

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode