ADVrider

Go Back   ADVrider > Gear > Vendors
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 02-27-2013, 12:48 AM   #1
gefr OP
Life is a trip
 
gefr's Avatar
 
Joined: Nov 2005
Location: East Med, Greece
Oddometer: 3,553
Base plate for KTM 990 ITG foam air filter.

Aluminum base plate cut with laser for KTM 990 ITG Superflow foam air filter. Matches with ITG JC30/65 model.

Cost will be 45€, shipping is free.
It can take up to 22 days to reach buyers, though it usually reaches USA in 10 days.

Upper side:


Lower side:


Plates without the breather hole and/or without temp sensor are now available, you just need to ask them specifically.


I can also include blanking plates with another 5€.

DZUS half turn clips and sealing flanges for throttle bodies are included. Sealing flanges should be fitted under the base plate.

Foam filters are not included.
__________________
There is always a reason!!
Fuel filters Fuel pump
Aluminum base plate for ITG foam air filter
Clutch master cylinder resleeving
Out of office April 18 to 27

gefr screwed with this post 03-30-2014 at 01:00 AM
gefr is offline   Reply With Quote
Old 05-07-2013, 02:07 AM   #2
rossguzzi
990 Adv.
 
rossguzzi's Avatar
 
Joined: Oct 2012
Location: Bottom left hand side of OZ
Oddometer: 647
Do they fit in the airbox? Or would I put the lid of the airbox back on?
rossguzzi is offline   Reply With Quote
Old 05-07-2013, 02:11 AM   #3
gefr OP
Life is a trip
 
gefr's Avatar
 
Joined: Nov 2005
Location: East Med, Greece
Oddometer: 3,553
No they replace the whole airbox completely.

The base plate sits on the throttle bodies. Τhe foam filter attaches on the base plate.
Cheers.
__________________
There is always a reason!!
Fuel filters Fuel pump
Aluminum base plate for ITG foam air filter
Clutch master cylinder resleeving
Out of office April 18 to 27

gefr screwed with this post 07-13-2013 at 12:09 PM
gefr is offline   Reply With Quote
Old 05-07-2013, 11:26 AM   #4
LocuL
Gnarly Infantry
 
LocuL's Avatar
 
Joined: Dec 2006
Location: Denmark - Jutland
Oddometer: 1,106
Could/would you make any for the RC8.
__________________
KTM 950(1190) Adv-s, Soon to be Project 1190
KTM 530 EXC-R 08
LocuL is offline   Reply With Quote
Old 05-07-2013, 11:36 AM   #5
gefr OP
Life is a trip
 
gefr's Avatar
 
Joined: Nov 2005
Location: East Med, Greece
Oddometer: 3,553
Mmm interesting thought.

It will take a while though... let me put this into perspective...
__________________
There is always a reason!!
Fuel filters Fuel pump
Aluminum base plate for ITG foam air filter
Clutch master cylinder resleeving
Out of office April 18 to 27

gefr screwed with this post 07-13-2013 at 12:09 PM
gefr is offline   Reply With Quote
Old 06-04-2013, 04:29 AM   #6
alongat
Studly Adventurer
 
alongat's Avatar
 
Joined: Jan 2010
Location: Toronto, Canada
Oddometer: 601
GEFR, I want one of these for my 990ADV - how do I place an order with you? If you prefer, feel free to email me offline at alongat.gat@gmail.com

Thank you
__________________
Toronto, Canada
2012 KTM 990 Adv-R
2005 Ducati 999R - bucket list must-have

And how can this be? For he is the Kwisatz Haderach!
alongat is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 04:19 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014