|03-30-2013, 10:59 PM||#1|
Joined: Aug 2012
Does your fork rotate
So i was looking at my bike's r1200 forks (08) compared to my buddies (07), both GS non GSAs and my my forks rotate and his do not. I got a little worried about this. Does any one know any thing about it?? it is the upper fork section that rotates compared to the steering stem. I tried to post pics but this is my first pic post so please bear with me if it does not work.
Cheers, and thanks for all the help in advance
|03-30-2013, 11:34 PM||#2|
Joined: Oct 2007
Location: Grapevine, TX
There is a locknut under that black plastic cap on top of the upper fork bridge.
There should be a small notch somewhere on the edge, just big enough to pry it off with the tip of a small screwdriver.
The nut should be torqued to 30 ft-lbs.
The nut is on top of a rubber bushing in the fork bridge. The bushings tend to loosen up a little with age and being under tension.
Don't over-torque the nut to try to stop them from turning. If the torque is good, just let it be.
Well hes one of those who knows that life
Is just a leap of faith
Spread your arms and hold you breath
And always trust your cape (Guy Clark)
VonHelm screwed with this post 03-30-2013 at 11:40 PM
|03-30-2013, 11:51 PM||#3|
Joined: Oct 2012
Location: Tucson, AZ
|03-30-2013, 11:54 PM||#4|
Joined: Jul 2007
Location: Delta/, Cariboo BC
Hola amigo. They all do that.
(Me a 2010 GSA.) Part of the quirky design. The tubes are not holding the load, only direcing it.
Spratley. Dr. Spratley.
|Thread Tools||Search this Thread|