|04-25-2013, 04:36 AM||#1|
Joined: Nov 2012
Location: south australia
KLR650 2011 exhaust budget mod!!!
Read some stuff about a mod for standard muffler, it involved making a mandrel and using a holesaw , about 2'' to cut out the small pipe,did that,next step was to twist the end baffle out. THIS IS NOT POSSIBLE. I then used a smaller diameter hole saw and cut again removing a large washer shape. So original pipe is still there.What i'm saying is2011 on mufflers are of different construction to foil this kind of tampering. I got it done but a lot of trial and error. alot of time too, and the need for some specialed cutting gear. my advice; buy a a/m one.
|04-25-2013, 04:45 AM||#2|
Joined: Jul 2010
The KLR exhaust mod attempts never cease to amaze me.
I have a 2009, and I am fine enough with it sounding like a constipated lawn tractor. Soon as you go with aftermarket exhaust, you have to mess with jets n shit. Not worth it IMO. At least until someone shows me an affordable alternative that does not sound too loud or look like shit or cost more than a couple hundred bucks.
Yes, I am "KLR cheap" and a member of the milk-crate-mafia.
If a guy has the tweety bird thing going on, then I understand the need to uhh, hammer n shit on it.
This posted more for entertainment, the guy kinda funny
More videos by Everide found here: http://www.youtube.com/user/eveRideorg?feature=watch
-Ah, you're wasting you're time. They can't track us over rocks.
Tell them that.......... --Who are those guys?
Unstable Rider screwed with this post 04-25-2013 at 04:58 AM
|Thread Tools||Search this Thread|