ADVrider

Go Back   ADVrider > Gear > The Garage
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 05-10-2013, 04:55 AM   #1
blaster11 OP
Ecuador here we come
 
blaster11's Avatar
 
Joined: May 2008
Location: Southern Maryland
Oddometer: 6,686
Chain Tensioner Tool?

A while back I was watching someone tighten their chain on a japenese dual-sport bike with this style of tensioner (#24 or #29 in pic).



The tool was like a wrench that grabbed th nub on the tensioner, and rather effortlessly click it up a tooth. I wish had I asked him who made it, or where he got it. It's got to better than the screwdriver and hammer method.

So, anybody got intel on the tensioner tool?
__________________
Bruce
Adventures of Blaster and Dorito
blaster11 is offline   Reply With Quote
Old 05-10-2013, 11:11 AM   #2
AustinJake
TE450-KLE-FXDWG
 
AustinJake's Avatar
 
Joined: Aug 2010
Location: Austin, TX
Oddometer: 3,676
When you loosen the axle nut, the entire axle/wheel assembly should be so loose, that you just scoot the rear wheel back a little and advance the snail adjuster one click, then kinda hit the rear of the tire to scoot everything back forward/tight. I always would use a Sharpie to mark the original position on the snail cam. If you are having to use a hammer to move the snail adjuster one click, something is too tight on your bike.
__________________
____________________________________
Get fit. Stay safe. Enjoy life. Learn something to help someone in need.
AustinJake is offline   Reply With Quote
Old 05-10-2013, 08:34 PM   #3
GreaseMonkey
Preshrunk & Cottony
 
GreaseMonkey's Avatar
 
Joined: Jun 2006
Location: The only county in Illinois with no train tracks
Oddometer: 5,235
I believe the tool you are looking for is an "adjustable hook spanner wrench"
GreaseMonkey is offline   Reply With Quote
Old 05-15-2013, 04:28 PM   #4
tundradirtbiker
Gnarly Adventurer
 
Joined: Aug 2009
Location: Oregon City
Oddometer: 267
Using chain tension to hold snail adjuster in place

Set the adjusters as described above. Put a small punch in the back sprocket btwn chain. Rotate the wheel back til it tensions the chain on adjusters and tighten the axle bolt.
__________________
'05 450 EXC
tundradirtbiker is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 04:23 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014