ADVrider

Go Back   ADVrider > Bikes > Orange Crush
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 07-07-2013, 10:54 AM   #1
bikepharmer OP
Baja is on the way
 
bikepharmer's Avatar
 
Joined: Jul 2008
Oddometer: 133
filler neck seal on 990

My left side tank has a very slight leak from the seal that sits underneath the filler neck collar (the one with the Allen head bolts). I am getting ready to source the part, but need advice from the group if there is anything tricky about replacing this seal, or what may have caused it to fail. Bike is stock, no flap or canister ectomies. I am pretty careful to not over fill tanks.

I have the KTM service manual, but it doesn't have any info on replacing this seal. I did check out the exploded diagram and it looks pretty straight forward.

Thanks in advance for any advice.
__________________
2012 KTM 990 ADV R.
2007 KLX 250S
The man who starts alone can start today.
bikepharmer is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 05:41 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014