ADVrider

Go Back   ADVrider > Bikes > Orange Crush
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 10-03-2013, 09:09 PM   #1
gearheadE30 OP
Studly Adventurer
 
gearheadE30's Avatar
 
Joined: Jan 2012
Location: Indiana
Oddometer: 515
Possible to buy individual toolkit tools?

I really like the OE 950 toolkit, but I am missing two very important tools: 5mm allen key for the front body panels and the 10mm socket, which I discovered when I got a flat tire and needed that particular bit to remove the axle...

I haven't been able to find any of the stock toolkit tools for sale online anywhere, at least not without buying a whole new toolkit. Anyone know of a place to do that, or have and extra of that unique little 10mm socket they wouldn't mind selling? I could go the hardware store route, but in the interest of space I'd like to not have to add a ratchet to the toolkit as well. The local dealer doesn't sell the individual parts either, fwiw.
__________________
1986 Yamaha XT350
2005.5 KTM 950 Adventure
1991 BMW 318is turbo track car
1989 Chevrolet Caprice Classic Wagon, TBI 5.7, NV3500 5-speed, lowered, etc...bike hauler
gearheadE30 is offline   Reply With Quote
Old 10-04-2013, 02:33 PM   #2
Peanuts
Beastly Adventurer
 
Peanuts's Avatar
 
Joined: Sep 2009
Location: UK
Oddometer: 1,301
The allen key is a standard part from any tool store.

The socket is only available as a kit with the T handle and all the sockets

Part Number: 60029070300
Description: T-WRENCH WS=6/8/10/TX45/SK4X1
original partnumber 60029070200
superceeded by 60029070300
Retail: $20.39
Your Price: $16.31 (End of Summer Savings 20% discount)
Peanuts is online now   Reply With Quote
Old 10-04-2013, 04:51 PM   #3
MAXVERT
Rough Rider
 
MAXVERT's Avatar
 
Joined: Jan 2004
Location: Sun Valley Idaho
Oddometer: 975
I have those for U, I use quarter inch drive sockets in my tool kit.
Get me you po info and I'll get them to you.

Max
__________________
Da oggi la strada
senza limiti
MAXVERT is online now   Reply With Quote
Old 10-04-2013, 05:50 PM   #4
unaweep
Uses lotsa band-aids
 
unaweep's Avatar
 
Joined: Jan 2006
Location: Western Colorado
Oddometer: 15,225
Munn racing sells em.
unaweep is offline   Reply With Quote
Old 10-05-2013, 06:39 AM   #5
gearheadE30 OP
Studly Adventurer
 
gearheadE30's Avatar
 
Joined: Jan 2012
Location: Indiana
Oddometer: 515
Ah, gotcha. PM sent maxvert. Thanks guys!
__________________
1986 Yamaha XT350
2005.5 KTM 950 Adventure
1991 BMW 318is turbo track car
1989 Chevrolet Caprice Classic Wagon, TBI 5.7, NV3500 5-speed, lowered, etc...bike hauler
gearheadE30 is offline   Reply With Quote
Old 10-05-2013, 09:06 AM   #6
SierraJeep
It's toast
 
SierraJeep's Avatar
 
Joined: Jun 2010
Location: Nevada City, CA
Oddometer: 611
Interesting... The kit that came with my 2010 990 included a handy 10mm x 13mm open end wrench combo. Unfortunately the 13mm end was deformed and had the tips pressed slightly together. Classic, a 13mm wrench with an 11.5mm opening!

I just set it aside and now carry two smaller wrenches to use to adjust the chain. Apparently not many folks make the 10/13 mm combo. I'll check Munn Racing to see if they list it. It'd be good to have one to tape/attach to my Motion Pro 32mm/tire iron (the most handy tool in my kit).
__________________
Tod

2010 KTM 990 Adventure
2010 KTM 450 EXC
SierraJeep is offline   Reply With Quote
Old 10-05-2013, 02:40 PM   #7
slackmeyer
Don't mean sheeit. .
 
slackmeyer's Avatar
 
Joined: Jul 2007
Location: Berzerkeley, CA
Oddometer: 2,857
Quote:
Originally Posted by SierraJeep View Post
Interesting... The kit that came with my 2010 990 included a handy 10mm x 13mm open end wrench combo. Unfortunately the 13mm end was deformed and had the tips pressed slightly together. Classic, a 13mm wrench with an 11.5mm opening!

I just set it aside and now carry two smaller wrenches to use to adjust the chain. Apparently not many folks make the 10/13 mm combo. I'll check Munn Racing to see if they list it. It'd be good to have one to tape/attach to my Motion Pro 32mm/tire iron (the most handy tool in my kit).
Somebody probably hammered on the 13mm end. Just bring it back to a nice fit with a file and you're good to go.

BTW, there were parts missing from my tool kit, and other socket sizes that I wanted to carry, so I made an adapter to go from the 5mm hex/allen to a standard 1/4" drive, just by welding together a 5mm socket and a very short 1/4" extension. The whole thing is the size of a 5mm deep socket.
__________________
Zak

ktm
old bmw
others
slackmeyer is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 08:40 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014