ADVrider

Go Back   ADVrider > Bikes > Orange Crush
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 01-02-2014, 08:48 PM   #1
MymoJoe OP
Ride Ride Ride
 
MymoJoe's Avatar
 
Joined: Sep 2005
Location: Fernvale QLD not close enough to the desert
Oddometer: 2,678
KTM950se sub frame bolt and nut

Hi I have lost this bolt and insert nut from my KTM950se. I can't find the nut on a parts fishe anywhere...

does anyone know the part number or where I can located one?

Joe
__________________
Simpson Trip 2008

http://www.advrider.com/forums/showt...33#post7397233




Life should NOT be a journey to the grave with the intention of arriving safely in a well-preserved body, but rather to skid in sideways, body thoroughly used up, totally worn out and screaming "WOO HOO - what a ride!"
MymoJoe is offline   Reply With Quote
Old 01-02-2014, 09:49 PM   #2
brents347
Trusting my Cape...
 
brents347's Avatar
 
Joined: Mar 2006
Location: Where the hell is Truckee, CA?
Oddometer: 3,391
All 4 sub frame bolts are the same part number. 60003004027.

The nut is a different story. KTM doesn't list a part number. On the top bolts, aren't the bolts thraded into the frame? And on the bottom aren't they threaded into the sub-frame?
__________________
07 Yamaha R6
07 KTM 950 Super Enduro
04 KTM 250exc- plated two-stroke

01 Kawasaki KE100
74 Honda MR50
brents347 is offline   Reply With Quote
Old 01-02-2014, 11:50 PM   #3
Sumi
Beastly Adventurer
 
Sumi's Avatar
 
Joined: Mar 2010
Location: Hungary
Oddometer: 1,494
Quote:
Originally Posted by brents347 View Post
All 4 sub frame bolts are the same part number. 60003004027.

The nut is a different story. KTM doesn't list a part number. On the top bolts, aren't the bolts thraded into the frame? And on the bottom aren't they threaded into the sub-frame?
On the ADV there are..
__________________
2005.5 950 Adventure (with 265mm travel suspension)
Sumi is online now   Reply With Quote
Old 01-03-2014, 04:00 AM   #4
DirtyADV
Beastly Adventurer
 
DirtyADV's Avatar
 
Joined: Jan 2007
Location: SWEDEN, Skellefteå
Oddometer: 1,772
Quote:
Originally Posted by Sumi View Post
On the ADV there are..
Its a normal nut pressed into the subframe. For lower mounts that is.

And I might be wrong but think that the bolts holding the subframe are M10x1,25, fine thread that is.

But have a sidestand relocator that uses that place and needed to change the nut since the bolt was a normal thread M10x1,5.

EDIT: had to look up and no nut listed for the Adventure either, and thread pitch is correct so a M10x1,25 nut should do the trick.

/Johan
__________________
Have changed name, was previously Dirty950

www.dirtyadv.com (under construction)
DirtyADV is offline   Reply With Quote
Old 01-15-2014, 09:00 PM   #5
MymoJoe OP
Ride Ride Ride
 
MymoJoe's Avatar
 
Joined: Sep 2005
Location: Fernvale QLD not close enough to the desert
Oddometer: 2,678
dunno that is why I ask....

the nut appears to be some sort of insert nut that looks pressed in?

So what is the solution?

I tried to jam a nut in place with the OEM recessed allen head bolt.. first ride out it fell out (yeah it was loctited...)

now revisited it, there seems to need a bush to fill the frame to reduce the amount of slop...

I still have no idea what type of nut to use.. I tried liquid metal to "glue" a nut in place that I tapered with a grinder.. and it fell out...... I can't be the first to have this problem..
__________________
Simpson Trip 2008

http://www.advrider.com/forums/showt...33#post7397233




Life should NOT be a journey to the grave with the intention of arriving safely in a well-preserved body, but rather to skid in sideways, body thoroughly used up, totally worn out and screaming "WOO HOO - what a ride!"
MymoJoe is offline   Reply With Quote
Old 01-16-2014, 02:24 AM   #6
johnno950
Studly Adventurer
 
johnno950's Avatar
 
Joined: Jul 2010
Location: central qld australia
Oddometer: 752
Quote:
Originally Posted by MymoJoe View Post
the nut appears to be some sort of insert nut that looks pressed in?

So what is the solution?

I tried to jam a nut in place with the OEM recessed allen head bolt.. first ride out it fell out (yeah it was loctited...)

now revisited it, there seems to need a bush to fill the frame to reduce the amount of slop...

I still have no idea what type of nut to use.. I tried liquid metal to "glue" a nut in place that I tapered with a grinder.. and it fell out...... I can't be the first to have this problem..
Have a look at aerobolt australia pty ltd,they have threaded inserts,would it if applicable be of any use to use one of their inserts in the damaged area with a longer bolt/hardened washer?
johnno950 is online now   Reply With Quote
Old 01-17-2014, 12:56 PM   #7
MymoJoe OP
Ride Ride Ride
 
MymoJoe's Avatar
 
Joined: Sep 2005
Location: Fernvale QLD not close enough to the desert
Oddometer: 2,678
thanks

Thanks Johnno. I gave them a call. What a fantastic business with great service. They are sending me the correct size inserts...

I will rip the subframe off today.

Joe


Quote:
Originally Posted by johnno950 View Post
Have a look at aerobolt australia pty ltd,they have threaded inserts,would it if applicable be of any use to use one of their inserts in the damaged area with a longer bolt/hardened washer?
__________________
Simpson Trip 2008

http://www.advrider.com/forums/showt...33#post7397233




Life should NOT be a journey to the grave with the intention of arriving safely in a well-preserved body, but rather to skid in sideways, body thoroughly used up, totally worn out and screaming "WOO HOO - what a ride!"
MymoJoe is offline   Reply With Quote
Old 01-17-2014, 04:31 PM   #8
wcohl
Gnarly Adventurer
 
Joined: Nov 2008
Oddometer: 236
Quote:
Thanks Johnno. I gave them a call. What a fantastic business with great service. They are sending me the correct size inserts...
Joe,

If the subframe is like the subframe on the smaller KTM's (<530), there is also a metal plug to reinforce the aluminum tube. I've read of some repairs where a new metal plug was fabbed up without the threaded insert, and only the metal plug was threaded.
wcohl is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 02:53 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014