ADVrider

Go Back   ADVrider > Bikes > Orange Crush
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 06-05-2014, 09:07 AM   #1
Womble_CH OP
dribbling baboon
 
Womble_CH's Avatar
 
Joined: Sep 2013
Location: French Alps
Oddometer: 205
1190 AdvR ABS sensor

Anybody had to replace the ABS sensor (part no 76042025000) on a 1190 Adventure ?

Mine seems to be broken, I get ABS/MTC failure messages after 300 meters. During those 300m, before the failure messages appear, the ABS works, then it stops working (front and rear).

I went to the workshop and got the memory read out. It mentiones ABS failure front / rear and rear ABS sensor defective.

On the parts manual it seems to be a short cble, but on the bike, it goes all the way up under the saddle.

Its a $50 spare part, so I hope that it can be replaced easily.
As usual the repair manual doesn't consider this worth being mentioned.
Womble_CH is offline   Reply With Quote
Old 06-05-2014, 10:41 AM   #2
Womble_CH OP
dribbling baboon
 
Womble_CH's Avatar
 
Joined: Sep 2013
Location: French Alps
Oddometer: 205
Ok, seems to be plug&play. The cable ends under the saddle in a plug just behind the air filter box. If its that easy, probably really not worth mentioning in the repair manual.
Womble_CH is offline   Reply With Quote
Old 06-11-2014, 05:08 AM   #3
Womble_CH OP
dribbling baboon
 
Womble_CH's Avatar
 
Joined: Sep 2013
Location: French Alps
Oddometer: 205
Here is my latest update on the topic.

Not the sensor is at fault, but the sensor gear. In my case it got slightly bend away from the sensor between two screws.



Real flat, the sensor gear on the brake disk should look like this :



It seems that this little extra space between the sensor and the sensor gear would create irregularities in the measures above a certain speed, in my case abt 40 km/h on the speedo, causing ABS/MTC to fail.
Womble_CH is offline   Reply With Quote
Old 06-11-2014, 05:20 AM   #4
scudrunner82
clean chain therapy
 
scudrunner82's Avatar
 
Joined: Oct 2012
Location: Catskill, NY
Oddometer: 1,114
Not a bad idea to take the extra time to remove the sensor magnet before you remove or replace the wheels. It can save you from damaging stuff while wrestling the wheels on and off.
__________________
Hungry Tenere Trip 2013
02' CRF450, 02' Monster 900, 14 1190R, 14' 350 EXC-F,

"Those who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety."
scudrunner82 is offline   Reply With Quote
Old 06-11-2014, 05:34 AM   #5
Womble_CH OP
dribbling baboon
 
Womble_CH's Avatar
 
Joined: Sep 2013
Location: French Alps
Oddometer: 205
Quote:
Originally Posted by scudrunner82 View Post
Not a bad idea to take the extra time to remove the sensor magnet before you remove or replace the wheels. It can save you from damaging stuff while wrestling the wheels on and off.
+1 its among the very first steps in the manual.
Womble_CH is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 03:54 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014